Evaluation Kits Boards And Modules - Connector Parts

If you are in need of Evaluation Kits Boards And Modules parts or other related items, you have come to the right place. Get started today to experience the future of part procurement. At Aviation Domain 360, we make it our priority to stock items that serve a diverse set of industry applications. As such, customers from all industry verticals have the opportunity to acquire what they need quickly and easily.

Aviation Domain 360 is your one-stop-shop for all of your operational requirements. With an inventory containing over 2 billion new, used, obsolete, and hard-to-find items, customers can easily locate everything they need. Some of the products we carry include top part numbers of Evaluation Kits Boards And Modules such as a1101r04c, a1101r08a, a1101r08c, a1101r09c, a2500r24c, and others, all of which have been vetted for quality, reliability, and functionality. As we operate with FAA AC 00-56B, AS9120B, and ISO 9001:2015 accreditation, you can trust in the integrity of our inventory.

Manufacturer's List for Evaluation Kits Boards And Modules

Itt Cannon Itt Corporation Microchip Technology St Micro Electronics Texas Instruments

Displaying Page 1 of 2

Part No.	Description	Manufacturer	RFQ
a1101r04c	Connectorized CC1101 based, general purpose low power radio	Texas Instruments	RFQ
a1101r08a	Connectorized CC1101 based, general purpose low power radio (EU)	Texas Instruments	RFQ
a1101r08c	Connectorized CC1101 based, general purpose low power radio (EU)	Texas Instruments	RFQ
a1101r09c	Connectorized CC1101 based, general purpose low power radio (USA/CA)	Texas Instruments	RFQ
a2500r24c	Connectorized CC2500 based, general purpose low power radio	Texas Instruments	RFQ
a1101r04c	Connectorized CC1101 based, general purpose low power radio	Texas Instruments	RFQ
a1101r08a	Connectorized CC1101 based, general purpose low power radio (EU)	Texas Instruments	RFQ
a1101r08c	Connectorized CC1101 based, general purpose low power radio (EU)	Texas Instruments	RFQ
a1101r09c	Connectorized CC1101 based, general purpose low power radio (USA/CA)	Texas Instruments	RFQ
a2500r24c	Connectorized CC2500 based, general purpose low power radio	Texas Instruments	RFQ
dc369-ltc1646-evaluation-kit	Demonstration Circuit DC369 demonstrates the LTC1646's ability to safely hot swap a CPCI bus requiring 5V and/or 3.3V supplies. The LTC1646 is able to power a wide range of capacitive loads in current limit and uses dual level circuit breakers to protect against over current and short-circuit fault conditions. In addition, the LTC1646 biases bus I/O connector pins to 1V, monitors the state of the 5VOUT and 3.3VOUT supply voltages with the HEALTHY# signal and combines PCI_RST# with HEALTHY# on-chip to generate the LOCAL_PCI_RST# signal.	Itt Cannon	RFQ
dc429-lt4250-evaluation-kit	Demonstration circuit 429 is a Hot SwapÖ controller designed for dual û 48V battery feeds in telecom subsystems. This demo board is optimized for 2A maximum operating current, making it ideal for loads of 25W to 75W. The LT4250's circuit breaker is immune from transient currents arising from load dump, voltage spikes, and input steps. Provision is made for interfacing the LT4250's power good output either directly or via an opto isolator to a power converter, allowing for inclusion of a common mode filter block. The Connection Sense terminal helps eliminate uncontrolled arcing and associated damage to the backplane connector in real-world operating environments.	Itt Cannon	RFQ
dc369-ltc1646-evaluation-kit	Demonstration Circuit DC369 demonstrates the LTC1646's ability to safely hot swap a CPCI bus requiring 5V and/or 3.3V supplies. The LTC1646 is able to power a wide range of capacitive loads in current limit and uses dual level circuit breakers to protect against over current and short-circuit fault conditions. In addition, the LTC1646 biases bus I/O connector pins to 1V, monitors the state of the 5VOUT and 3.3VOUT supply voltages with the HEALTHY# signal and combines PCI_RST# with HEALTHY# on-chip to generate the LOCAL_PCI_RST# signal.	Itt Corporation	RFQ
dc429-lt4250-evaluation-kit	Demonstration circuit 429 is a Hot SwapÖ controller designed for dual û 48V battery feeds in telecom subsystems. This demo board is optimized for 2A maximum operating current, making it ideal for loads of 25W to 75W. The LT4250's circuit breaker is immune from transient currents arising from load dump, voltage spikes, and input steps. Provision is made for interfacing the LT4250's power good output either directly or via an opto isolator to a power converter, allowing for inclusion of a common mode filter block. The Connection Sense terminal helps eliminate uncontrolled arcing and associated damage to the backplane connector in real-world operating environments.	Itt Corporation	RFQ
dim100con5pk	DIM100 Connector 5 PackDescription	Texas Instruments	RFQ
dc369-ltc1646-evaluation-kit	Demonstration Circuit DC369 demonstrates the LTC1646's ability to safely hot swap a CPCI bus requiring 5V and/or 3.3V supplies. The LTC1646 is able to power a wide range of capacitive loads in current limit and uses dual level circuit breakers to protect against over current and short-circuit fault conditions. In addition, the LTC1646 biases bus I/O connector pins to 1V, monitors the state of the 5VOUT and 3.3VOUT supply voltages with the HEALTHY# signal and combines PCI_RST# with HEALTHY# on-chip to generate the LOCAL_PCI_RST# signal.	Itt Cannon	RFQ
dc429-lt4250-evaluation-kit	Demonstration circuit 429 is a Hot SwapÖ controller designed for dual û 48V battery feeds in telecom subsystems. This demo board is optimized for 2A maximum operating current, making it ideal for loads of 25W to 75W. The LT4250's circuit breaker is immune from transient currents arising from load dump, voltage spikes, and input steps. Provision is made for interfacing the LT4250's power good output either directly or via an opto isolator to a power converter, allowing for inclusion of a common mode filter block. The Connection Sense terminal helps eliminate uncontrolled arcing and associated damage to the backplane connector in real-world operating environments.	Itt Cannon	RFQ
dim100con5pk	DIM100 Connector 5 PackDescription	Texas Instruments	RFQ
steval-ifp019v1	Other Development Tools VNI4140K-32 Solid State Relay Demo BRD	St Micro Electronics	RFQ
steval-pcc012v1	BOARD DEM CONN GATEWAY STM32F107	St Micro Electronics	RFQ

Page 1 of 2

Guaranteed on-time delivery
Confirmed purchase orders stay tracked through U.S. fulfillment, with procurement watching ship dates through delivery.
5,100+ stocked manufacturers
A stocked OEM network keeps alternatives visible when legacy NSNs, CAGE codes, or superseded part numbers need a fast cross-check.
Complete purchasing solutions
One RFQ can combine hard-to-source lines, quote routing, buyer follow-up, and basket updates without forcing a checkout flow.
15-minute quote response
Requests route to the procurement desk around the clock, keeping urgent aviation and defense requirements inside the response window.
Customized & user-friendly
Search by NSN, NIIN, CAGE, FSC, or part number, then move directly from catalog context into a quote-ready line item.